If something goes wrong with the garage door, don’t panic. Keep an eye out for several common repairs needed for a garage door.

Discover Repairs Needed For a Garage Door

Discover Repairs Needed For a Garage Door

Homeowners should keep these things in mind when the garage door goes a little haywire.

Safety Sensors

No one wants the garage door coming down on anyone or anything. There are safety sensors located on the bottom of the garage door that will prevent it from going down if something is in the way, but what happens when there is nothing in the way but the garage still won’t go all the way down? It could be that one of the sensors isn’t aligned properly or there might be something in the way of the beam that is telling the door not to come down. Take a minute to look at where the sensor is located. Follow the line to make sure it is pointed in the right direction, then walk across to see if anything is in the way. There could be a scooter that wasn’t put up correctly that is blocking the sensor, or something small may have fallen to the side and caused it to seem like something was in the way. It’s also worth taking a minute to clean up the sensors to ensure that dust and debris aren’t the source of the problem of repairs needed for a garage door.

Safety Sensors

Opener

It can be frustrating to push the garage door opener and not see any type of movement, especially when you are getting ready to pull in. If you’ve already checked the safety sensors, it’s easy to jump to conclusions and assume that the garage door motor is out and needs to be replaced. However, start your search for a solution with the garage opener. The remote may just need batteries in order to get things back on track. This means that one of the most common repairs needed for a garage door doesn’t require a lot of work on your part. It takes just a couple of seconds to replace the batteries. You may also want to double-check the wall switch to see if it works to bring the garage door up and down. However, if the remote and the wall switch don’t work, you could have a more serious problem with the circuit board or the garage door motor. This often requires the assistance of a professional.

Opener

Knowing When it's Time to Replace Garage Door Spring

Have you ever wondered what it is that is making the garage door go up and down at the touch of a button? While there are several moving parts, the spring is one of the most important. Because of the amount of use that it sees on a regular basis, when something goes wrong, it could mean that it’s time to replace garage door spring parts. The springs are tightly wound, making it possible for the mechanism to move a large garage door. If the spring breaks, there isn’t going to be any movement in the door. While there are homeowners who will try to replace garage door spring components without any professional assistance, it can be a tricky task. Despite being one of the most common garage repair scenarios, it can be tough to remove the old spring safely and add a new one without any type of risk or injury. Some garage doors require only one spring, while others require two. This is based on the weight of the door. When you call for a garage repair, make sure to ask the technician to double-check and make sure that you have the right number of springs for your door.

Springs

Cables

You’ve probably seen the cables working to pull your door up when the time comes and slowly releasing as the door makes its way back down. These cables are holding the weight of the door, so if something goes wrong, the door may come crashing down suddenly. If the cables are frayed or they look overly worn, it is a good idea to go ahead and replace them without testing your luck to see how long they last. While the parts alone aren’t pricey, the installation will be an additional cost. There is no way to repair the cables; replacement is the only option. Until the repair is complete, it is important to leave the garage door down to avoid injury or damage to the vehicle.

Tracks are an Often-Missed Garage Repair

Sometimes you notice a problem and want to tackle garage repair but don’t know where to start. You can’t always see the problem, but when it comes to the tracks that move the garage door up and down, you can often see exactly what is going wrong. You may notice that the door will only go a portion of the way up and then heads back down or vice versa. It can be tempting to keep pressing the garage opener to see if the same motion over and over will solve the problem. However, the more this happens, the more you can actually compound the problem and make it worse. Instead, make sure the garage door is back on the ground and take a closer look at the tracks. If they are bent out of shape, it can prevent smooth movement of the door. In some cases, you can work to bend them back into shape. Others times, a professional may need to come out and replace the tracks to ensure everything begins working well again. Using experts to help assess repairs needed for a garage door is often sensible.